Dekorationsartikel gehören nicht zum Leistungsumfang.
Sprache:
Englisch
57,60 €*
Versandkostenfrei per Post / DHL
Lieferzeit 1-2 Wochen
Kategorien:
Beschreibung
Never has something cried out for a cookbook quite as much as Cisco's Internetwork Operating System (IOS). IOS is powerful and flexible, but also confusing and daunting. Most tasks can be accomplished in several different ways. And you don't want to spend precious time figuring out which way is best when you're trying to solve a problem quickly.
That's what this cookbook is for. Fortunately, most router configuration tasks can be broken down into several more or less independent steps: you configure an interface, you configure a routing protocol, you set up backup links, you implement packet filters and other access control mechanisms. What you really need is a set of recipes that show you how to perform the most common tasks, so you can quickly come up with a good configuration for your site. And you need to know that these solutions work: you don't want to find yourself implementing a backup link at 2 A.M. because your main link is down and the backup link you set up when you installed the router wasn't quite right.
Thoroughly revised and expanded, Cisco IOS Cookbook, 2nd Edition, adds sections on MPLS, Security, IPv6, and IP Mobility, and presents solutions to the most common configuration problems, including:
* Configuring interfaces of many types, from serial to ATM and Frame Relay
* Configuring all of the common IP routing protocols (RIP, EIGRP, OSPF, and BGP)
* Configuring authentication
* Configuring other services, including DHCP and NTP
* Setting up backup links, and using HSRP to configure backup routers
* Managing the router, including SNMP and other solutions
* Using access lists to control the traffic through the router
If you work with Cisco routers, you need a book like this to help you solve problems quickly and effectively. Even if you're experienced, the solutions and extensive explanations will give you new ideas and insights into router configuration. And if you're not experienced--if you've just been given responsibility for managing a network with Cisco routers--this book could be a job-saver.
That's what this cookbook is for. Fortunately, most router configuration tasks can be broken down into several more or less independent steps: you configure an interface, you configure a routing protocol, you set up backup links, you implement packet filters and other access control mechanisms. What you really need is a set of recipes that show you how to perform the most common tasks, so you can quickly come up with a good configuration for your site. And you need to know that these solutions work: you don't want to find yourself implementing a backup link at 2 A.M. because your main link is down and the backup link you set up when you installed the router wasn't quite right.
Thoroughly revised and expanded, Cisco IOS Cookbook, 2nd Edition, adds sections on MPLS, Security, IPv6, and IP Mobility, and presents solutions to the most common configuration problems, including:
* Configuring interfaces of many types, from serial to ATM and Frame Relay
* Configuring all of the common IP routing protocols (RIP, EIGRP, OSPF, and BGP)
* Configuring authentication
* Configuring other services, including DHCP and NTP
* Setting up backup links, and using HSRP to configure backup routers
* Managing the router, including SNMP and other solutions
* Using access lists to control the traffic through the router
If you work with Cisco routers, you need a book like this to help you solve problems quickly and effectively. Even if you're experienced, the solutions and extensive explanations will give you new ideas and insights into router configuration. And if you're not experienced--if you've just been given responsibility for managing a network with Cisco routers--this book could be a job-saver.
Never has something cried out for a cookbook quite as much as Cisco's Internetwork Operating System (IOS). IOS is powerful and flexible, but also confusing and daunting. Most tasks can be accomplished in several different ways. And you don't want to spend precious time figuring out which way is best when you're trying to solve a problem quickly.
That's what this cookbook is for. Fortunately, most router configuration tasks can be broken down into several more or less independent steps: you configure an interface, you configure a routing protocol, you set up backup links, you implement packet filters and other access control mechanisms. What you really need is a set of recipes that show you how to perform the most common tasks, so you can quickly come up with a good configuration for your site. And you need to know that these solutions work: you don't want to find yourself implementing a backup link at 2 A.M. because your main link is down and the backup link you set up when you installed the router wasn't quite right.
Thoroughly revised and expanded, Cisco IOS Cookbook, 2nd Edition, adds sections on MPLS, Security, IPv6, and IP Mobility, and presents solutions to the most common configuration problems, including:
* Configuring interfaces of many types, from serial to ATM and Frame Relay
* Configuring all of the common IP routing protocols (RIP, EIGRP, OSPF, and BGP)
* Configuring authentication
* Configuring other services, including DHCP and NTP
* Setting up backup links, and using HSRP to configure backup routers
* Managing the router, including SNMP and other solutions
* Using access lists to control the traffic through the router
If you work with Cisco routers, you need a book like this to help you solve problems quickly and effectively. Even if you're experienced, the solutions and extensive explanations will give you new ideas and insights into router configuration. And if you're not experienced--if you've just been given responsibility for managing a network with Cisco routers--this book could be a job-saver.
That's what this cookbook is for. Fortunately, most router configuration tasks can be broken down into several more or less independent steps: you configure an interface, you configure a routing protocol, you set up backup links, you implement packet filters and other access control mechanisms. What you really need is a set of recipes that show you how to perform the most common tasks, so you can quickly come up with a good configuration for your site. And you need to know that these solutions work: you don't want to find yourself implementing a backup link at 2 A.M. because your main link is down and the backup link you set up when you installed the router wasn't quite right.
Thoroughly revised and expanded, Cisco IOS Cookbook, 2nd Edition, adds sections on MPLS, Security, IPv6, and IP Mobility, and presents solutions to the most common configuration problems, including:
* Configuring interfaces of many types, from serial to ATM and Frame Relay
* Configuring all of the common IP routing protocols (RIP, EIGRP, OSPF, and BGP)
* Configuring authentication
* Configuring other services, including DHCP and NTP
* Setting up backup links, and using HSRP to configure backup routers
* Managing the router, including SNMP and other solutions
* Using access lists to control the traffic through the router
If you work with Cisco routers, you need a book like this to help you solve problems quickly and effectively. Even if you're experienced, the solutions and extensive explanations will give you new ideas and insights into router configuration. And if you're not experienced--if you've just been given responsibility for managing a network with Cisco routers--this book could be a job-saver.
Über den Autor
Kevin Dooley has been designing and implementing networks as an independent consultant for more than ten years. He's built large scale Local and Wide Area Networks for several of Canada's largest companies. Kevin holds a PhD in physics from the University of Toronto and is the author of "Designing Large-Scale LANs" (O'Reilly).
Ian J. Brown is a Cisco Certified Internetworking Expert with more than 12 years of experience in the networking industry. His areas of expertise include TCP/IP and IP routing, as well as management, security, design, and troubleshooting for large-scale networks.
Inhaltsverzeichnis
Preface;
What's New in This Edition;
Organization;
What's in This Book;
Conventions Used in This Book;
Using Code Examples;
We'd Like Your Feedback!;
Safari® Enabled;
Acknowledgments;
Chapter 1: Router Configuration and File Management;
Introduction;
Configuring the Router via TFTP;
Saving Router Configuration to Server;
Booting the Router Using a Remote Configuration File;
Storing Configuration Files Larger Than NVRAM;
Clearing the Startup Configuration;
Loading a New IOS Image;
Booting a Different IOS Image;
Booting over the Network;
Copying an IOS Image to a Server;
Copying an IOS Image Through the Console;
Deleting Files from Flash;
Partitioning Flash;
Using the Router as a TFTP Server;
Using FTP from the Router;
Generating Large Numbers of Router Configurations;
Changing the Configurations of Many Routers at Once;
Extracting Hardware Inventory Information;
Backing Up Router Configurations;
Warm Reload;
Warm Upgrade;
Configuration Archiving;
Locking Configuration Access;
Chapter 2: Router Management;
Introduction;
Creating Command Aliases;
Managing the Router's ARP Cache;
Tuning Router Buffers;
Auto Tuning Buffers;
Using the Cisco Discovery Protocol;
Disabling the Cisco Discovery Protocol;
Using the Small Servers;
Enabling HTTP Access to a Router;
Enabling Secure HTTP (HTTPS) Access to a Router;
Using Static Hostname Tables;
Enabling Domain Name Services;
Disabling Domain Name Lookups;
Specifying a Router Reload Time;
Scheduling of Router Commands;
Displaying Historical CPU Values;
Creating Exception Dump Files;
Generating a Report of Interface Information;
Generating a Report of Routing Table Information;
Generating a Report of ARP Table Information;
Generating a Server Host Table File;
Chapter 3: User Access and Privilege Levels;
Introduction;
Setting Up User IDs;
Encrypting Passwords;
Using Better Password-Encryption Techniques;
Removing Passwords from a Router Configuration File;
Deciphering Cisco's Weak Password Encryption;
Displaying Active Users;
Sending Messages to Other Users;
Changing the Number of VTYs;
Changing VTY Timeouts;
Restricting VTY Access by Protocol;
Enabling Absolute Timeouts on VTY Lines;
Implementing Banners;
Disabling Banners on a Port;
Disabling Router Lines;
Reserving a VTY Port for Administrative Access;
Restricting Inbound Telnet Access;
Logging Telnet Access;
Setting the Source Address for Telnet;
Automating the Login Sequence;
Using SSH for Secure Access;
Changing Privilege Level of IOS Commands;
Defining Per User Privileges;
Defining Per Port Privileges;
Chapter 4: TACACS+;
Introduction;
Authenticating Login IDs from a Central System;
Restricting Command Access;
Losing Access to the TACACS+ Server;
Disabling TACACS+ Authentication on a Particular Line;
Capturing User Keystrokes;
Logging System Events;
Setting the IP Source Address for TACACS+ Messages;
Sample Server Configuration Files;
Chapter 5: IP Routing;
Introduction;
Finding an IP Route;
Finding Types of IP Routes;
Converting Different Mask Formats;
Using Static Routing;
Floating Static Routes;
Using Policy-Based Routing to Route Based on Source Address;
Using Policy-Based Routing to Route Based on Application Type;
Examining Policy-Based Routing;
Changing Administrative Distances;
Routing Over Multiple Paths with Equal Costs;
Static Routes That Track Interfaces or Other Routes;
Keeping Statistics on Routing Table Changes;
Chapter 6: RIP;
Introduction;
Configuring RIP Version 1;
Filtering Routes with RIP;
Redistributing Static Routes into RIP;
Redistributing Routes Using Route Maps;
Creating a Default Route in RIP;
Disabling RIP on an Interface;
Default Passive Interface;
Unicast Updates for RIP;
Applying Offsets to Routes;
Adjusting Timers;
Configuring Interpacket Delay;
Enabling Nonperiodic Updates;
Increasing the RIP Input Queue;
Configuring RIP Version 2;
Enabling RIP Authentication;
RIP Route Summarization;
Route Tagging;
Chapter 7: EIGRP;
Introduction;
Configuring EIGRP;
Filtering Routes with EIGRP;
Redistributing Routes into EIGRP;
Redistributing Routes into EIGRP Using Route Maps;
Disabling EIGRP on an Interface;
Adjusting EIGRP Metrics;
Adjusting Timers;
Enabling EIGRP Authentication;
EIGRP Route Summarization;
Logging EIGRP Neighbor State Changes;
Limiting EIGRP's Bandwidth Utilization;
EIGRP Stub Routing;
Route Tagging;
Viewing EIGRP Status;
Chapter 8: OSPF;
Introduction;
Configuring OSPF;
Filtering Routes in OSPF;
Adjusting OSPF Costs;
Creating a Default Route in OSPF;
Redistributing Static Routes into OSPF;
Redistributing External Routes into OSPF;
Manipulating DR Selection;
Setting the OSPF RID;
Enabling OSPF Authentication;
Selecting the Appropriate Area Types;
Using OSPF on Dial Interfaces;
Summarizing Routes in OSPF;
Disabling OSPF on Certain Interfaces;
Changing the Network Type on an Interface;
OSPF Route Tagging;
Logging OSPF Adjacency Changes;
Adjusting OSPF Timers;
Reducing OSPF Traffic in Stable Networks;
OSPF Virtual Links;
Viewing OSPF Status with Domain Names;
Debugging OSPF;
Chapter 9: BGP;
Introduction;
Configuring BGP;
Using eBGP Multihop;
Adjusting the Next-Hop Attribute;
Connecting to Two ISPs;
Connecting to Two ISPs with Redundant Routers;
Restricting Networks Advertised to a BGP Peer;
Adjusting Local Preference Values;
Load-Balancing;
Removing Private ASNs from the AS Path;
Filtering BGP Routes Based on AS Paths;
Reducing the Size of the Received Routing Table;
Summarizing Outbound Routing Information;
Prepending ASNs to the AS Path;
Redistributing Routes with BGP;
Using Peer Groups;
Authenticating BGP Peers;
Using BGP Communities;
Using BGP Route Reflectors;
Putting It All Together;
Chapter 10: Frame Relay;
Introduction;
Setting Up Frame Relay with Point-to-Point Subinterfaces;
Adjusting LMI Options;
Setting Up Frame Relay with Map Statements;
Using Multipoint Subinterfaces;
Configuring Frame Relay SVCs;
Simulating a Frame Relay Cloud;
Compressing Frame Relay Data on a Subinterface;
Compressing Frame Relay Data with Maps;
PPP over Frame Relay;
Viewing Frame Relay Status Information;
Chapter 11: Handling Queuing and Congestion;
Introduction;
Fast Switching and CEF;
Setting the DSCP or TOS Field;
Using Priority Queuing;
Using Custom Queuing;
Using Custom Queues with Priority Queues;
Using Weighted Fair Queuing;
Using Class-Based Weighted Fair Queuing;
Using NBAR Classification;
Controlling Congestion with WRED;
Using RSVP;
Manual RSVP Reservations;
Aggregating RSVP Reservations;
Using Generic Traffic Shaping;
Using Frame-Relay Traffic Shaping;
Using Committed Access Rate;
Implementing Standards-Based Per-Hop Behavior;
AutoQoS;
Viewing Queue Parameters;
Chapter 12: Tunnels and VPNs;
Introduction;
Creating a Tunnel;
Tunneling Foreign Protocols in IP;
Tunneling with Dynamic Routing Protocols;
Viewing Tunnel Status;
Creating an Encrypted Router-to-Router VPN in a GRE Tunnel;
Creating an Encrypted VPN Between the LAN Interfaces of Two Routers;
Generating RSA Keys;
Creating a Router-to-Router VPN with RSA Keys;
Creating a VPN Between a Workstation and a Router;
Creating an SSL VPN;
Checking IPSec Protocol Status;
Chapter 13: Dial Backup;
Introduction;
Automating Dial Backup;
Using Dialer Interfaces;
Using an Async Modem on the AUX Port;
Using Backup Interfaces;
Using Dialer Watch;
Using Virtual Templates;
Ensuring Proper Disconnection;
View Dial Backup Status;
Debugging Dial Backup;
Chapter 14: NTP and Time;
Introduction;
Time-Stamping Router Logs;
Setting the Time;
Setting the Time Zone;
Adjusting for Daylight Saving Time;
Synchronizing the Time on All Routers (NTP);
Configuring NTP Redundancy;
Setting the Router As the NTP Master for the Network;
Changing NTP Synchronization Periods;
Using NTP to Send Periodic Broadcast Time Updates;
Using NTP to Send Periodic Multicast Time Updates;
Enabling and Disabling NTP Per Interface;
NTP Authentication;
Limiting the Number of Peers;
Restricting Peers;
Setting the Clock Period;
Checking the NTP Status;
Debugging NTP;
NTP Logging;
Extended Daylight Saving Time;
NTP Server Configuration;
Chapter 15: DLSw;
Introduction;
Simple Bridging;
Configuring DLSw;
Using DLSw to Bridge Between Ethernet and Token Ring;
Converting Ethernet and Token Ring MAC Addresses;
Configuring SDLC;
Configuring SDLC for Multidrop Connections;
Using STUN;
Using BSTUN;
Controlling DLSw Packet Fragmentation;
Tagging DLSw Packets for QoS;
Supporting SNA Priorities;
DLSw+ Redundancy and Fault Tolerance;
Viewing DLSw Status Information;
Viewing SDLC Status Information;
Debugging DSLw;
Chapter 16: Router Interfaces and Media;
Introduction;
Viewing Interface Status;
Configuring Serial Interfaces;
Using an Internal T1 CSU/DSU;
Using an Internal ISDN PRI Module;
Using an Internal 56 Kbps CSU/DSU;
Configuring an Async Serial Interface;
Configuring ATM Subinterfaces;
Setting Payload Scrambling on an ATM Circuit;
Classical IP Over ATM;
Configuring Ethernet Interface Features;
Configuring Token Ring Interface Features;
Connecting VLAN Trunks with ISL;
Connecting VLAN Trunks with 802.1Q;
LPD Printer Support;
Chapter 17: Simple Network Management Protocol;
Introduction;
Configuring SNMP;
Extracting Router Information via SNMP Tools;
Recording Important Router...
What's New in This Edition;
Organization;
What's in This Book;
Conventions Used in This Book;
Using Code Examples;
We'd Like Your Feedback!;
Safari® Enabled;
Acknowledgments;
Chapter 1: Router Configuration and File Management;
Introduction;
Configuring the Router via TFTP;
Saving Router Configuration to Server;
Booting the Router Using a Remote Configuration File;
Storing Configuration Files Larger Than NVRAM;
Clearing the Startup Configuration;
Loading a New IOS Image;
Booting a Different IOS Image;
Booting over the Network;
Copying an IOS Image to a Server;
Copying an IOS Image Through the Console;
Deleting Files from Flash;
Partitioning Flash;
Using the Router as a TFTP Server;
Using FTP from the Router;
Generating Large Numbers of Router Configurations;
Changing the Configurations of Many Routers at Once;
Extracting Hardware Inventory Information;
Backing Up Router Configurations;
Warm Reload;
Warm Upgrade;
Configuration Archiving;
Locking Configuration Access;
Chapter 2: Router Management;
Introduction;
Creating Command Aliases;
Managing the Router's ARP Cache;
Tuning Router Buffers;
Auto Tuning Buffers;
Using the Cisco Discovery Protocol;
Disabling the Cisco Discovery Protocol;
Using the Small Servers;
Enabling HTTP Access to a Router;
Enabling Secure HTTP (HTTPS) Access to a Router;
Using Static Hostname Tables;
Enabling Domain Name Services;
Disabling Domain Name Lookups;
Specifying a Router Reload Time;
Scheduling of Router Commands;
Displaying Historical CPU Values;
Creating Exception Dump Files;
Generating a Report of Interface Information;
Generating a Report of Routing Table Information;
Generating a Report of ARP Table Information;
Generating a Server Host Table File;
Chapter 3: User Access and Privilege Levels;
Introduction;
Setting Up User IDs;
Encrypting Passwords;
Using Better Password-Encryption Techniques;
Removing Passwords from a Router Configuration File;
Deciphering Cisco's Weak Password Encryption;
Displaying Active Users;
Sending Messages to Other Users;
Changing the Number of VTYs;
Changing VTY Timeouts;
Restricting VTY Access by Protocol;
Enabling Absolute Timeouts on VTY Lines;
Implementing Banners;
Disabling Banners on a Port;
Disabling Router Lines;
Reserving a VTY Port for Administrative Access;
Restricting Inbound Telnet Access;
Logging Telnet Access;
Setting the Source Address for Telnet;
Automating the Login Sequence;
Using SSH for Secure Access;
Changing Privilege Level of IOS Commands;
Defining Per User Privileges;
Defining Per Port Privileges;
Chapter 4: TACACS+;
Introduction;
Authenticating Login IDs from a Central System;
Restricting Command Access;
Losing Access to the TACACS+ Server;
Disabling TACACS+ Authentication on a Particular Line;
Capturing User Keystrokes;
Logging System Events;
Setting the IP Source Address for TACACS+ Messages;
Sample Server Configuration Files;
Chapter 5: IP Routing;
Introduction;
Finding an IP Route;
Finding Types of IP Routes;
Converting Different Mask Formats;
Using Static Routing;
Floating Static Routes;
Using Policy-Based Routing to Route Based on Source Address;
Using Policy-Based Routing to Route Based on Application Type;
Examining Policy-Based Routing;
Changing Administrative Distances;
Routing Over Multiple Paths with Equal Costs;
Static Routes That Track Interfaces or Other Routes;
Keeping Statistics on Routing Table Changes;
Chapter 6: RIP;
Introduction;
Configuring RIP Version 1;
Filtering Routes with RIP;
Redistributing Static Routes into RIP;
Redistributing Routes Using Route Maps;
Creating a Default Route in RIP;
Disabling RIP on an Interface;
Default Passive Interface;
Unicast Updates for RIP;
Applying Offsets to Routes;
Adjusting Timers;
Configuring Interpacket Delay;
Enabling Nonperiodic Updates;
Increasing the RIP Input Queue;
Configuring RIP Version 2;
Enabling RIP Authentication;
RIP Route Summarization;
Route Tagging;
Chapter 7: EIGRP;
Introduction;
Configuring EIGRP;
Filtering Routes with EIGRP;
Redistributing Routes into EIGRP;
Redistributing Routes into EIGRP Using Route Maps;
Disabling EIGRP on an Interface;
Adjusting EIGRP Metrics;
Adjusting Timers;
Enabling EIGRP Authentication;
EIGRP Route Summarization;
Logging EIGRP Neighbor State Changes;
Limiting EIGRP's Bandwidth Utilization;
EIGRP Stub Routing;
Route Tagging;
Viewing EIGRP Status;
Chapter 8: OSPF;
Introduction;
Configuring OSPF;
Filtering Routes in OSPF;
Adjusting OSPF Costs;
Creating a Default Route in OSPF;
Redistributing Static Routes into OSPF;
Redistributing External Routes into OSPF;
Manipulating DR Selection;
Setting the OSPF RID;
Enabling OSPF Authentication;
Selecting the Appropriate Area Types;
Using OSPF on Dial Interfaces;
Summarizing Routes in OSPF;
Disabling OSPF on Certain Interfaces;
Changing the Network Type on an Interface;
OSPF Route Tagging;
Logging OSPF Adjacency Changes;
Adjusting OSPF Timers;
Reducing OSPF Traffic in Stable Networks;
OSPF Virtual Links;
Viewing OSPF Status with Domain Names;
Debugging OSPF;
Chapter 9: BGP;
Introduction;
Configuring BGP;
Using eBGP Multihop;
Adjusting the Next-Hop Attribute;
Connecting to Two ISPs;
Connecting to Two ISPs with Redundant Routers;
Restricting Networks Advertised to a BGP Peer;
Adjusting Local Preference Values;
Load-Balancing;
Removing Private ASNs from the AS Path;
Filtering BGP Routes Based on AS Paths;
Reducing the Size of the Received Routing Table;
Summarizing Outbound Routing Information;
Prepending ASNs to the AS Path;
Redistributing Routes with BGP;
Using Peer Groups;
Authenticating BGP Peers;
Using BGP Communities;
Using BGP Route Reflectors;
Putting It All Together;
Chapter 10: Frame Relay;
Introduction;
Setting Up Frame Relay with Point-to-Point Subinterfaces;
Adjusting LMI Options;
Setting Up Frame Relay with Map Statements;
Using Multipoint Subinterfaces;
Configuring Frame Relay SVCs;
Simulating a Frame Relay Cloud;
Compressing Frame Relay Data on a Subinterface;
Compressing Frame Relay Data with Maps;
PPP over Frame Relay;
Viewing Frame Relay Status Information;
Chapter 11: Handling Queuing and Congestion;
Introduction;
Fast Switching and CEF;
Setting the DSCP or TOS Field;
Using Priority Queuing;
Using Custom Queuing;
Using Custom Queues with Priority Queues;
Using Weighted Fair Queuing;
Using Class-Based Weighted Fair Queuing;
Using NBAR Classification;
Controlling Congestion with WRED;
Using RSVP;
Manual RSVP Reservations;
Aggregating RSVP Reservations;
Using Generic Traffic Shaping;
Using Frame-Relay Traffic Shaping;
Using Committed Access Rate;
Implementing Standards-Based Per-Hop Behavior;
AutoQoS;
Viewing Queue Parameters;
Chapter 12: Tunnels and VPNs;
Introduction;
Creating a Tunnel;
Tunneling Foreign Protocols in IP;
Tunneling with Dynamic Routing Protocols;
Viewing Tunnel Status;
Creating an Encrypted Router-to-Router VPN in a GRE Tunnel;
Creating an Encrypted VPN Between the LAN Interfaces of Two Routers;
Generating RSA Keys;
Creating a Router-to-Router VPN with RSA Keys;
Creating a VPN Between a Workstation and a Router;
Creating an SSL VPN;
Checking IPSec Protocol Status;
Chapter 13: Dial Backup;
Introduction;
Automating Dial Backup;
Using Dialer Interfaces;
Using an Async Modem on the AUX Port;
Using Backup Interfaces;
Using Dialer Watch;
Using Virtual Templates;
Ensuring Proper Disconnection;
View Dial Backup Status;
Debugging Dial Backup;
Chapter 14: NTP and Time;
Introduction;
Time-Stamping Router Logs;
Setting the Time;
Setting the Time Zone;
Adjusting for Daylight Saving Time;
Synchronizing the Time on All Routers (NTP);
Configuring NTP Redundancy;
Setting the Router As the NTP Master for the Network;
Changing NTP Synchronization Periods;
Using NTP to Send Periodic Broadcast Time Updates;
Using NTP to Send Periodic Multicast Time Updates;
Enabling and Disabling NTP Per Interface;
NTP Authentication;
Limiting the Number of Peers;
Restricting Peers;
Setting the Clock Period;
Checking the NTP Status;
Debugging NTP;
NTP Logging;
Extended Daylight Saving Time;
NTP Server Configuration;
Chapter 15: DLSw;
Introduction;
Simple Bridging;
Configuring DLSw;
Using DLSw to Bridge Between Ethernet and Token Ring;
Converting Ethernet and Token Ring MAC Addresses;
Configuring SDLC;
Configuring SDLC for Multidrop Connections;
Using STUN;
Using BSTUN;
Controlling DLSw Packet Fragmentation;
Tagging DLSw Packets for QoS;
Supporting SNA Priorities;
DLSw+ Redundancy and Fault Tolerance;
Viewing DLSw Status Information;
Viewing SDLC Status Information;
Debugging DSLw;
Chapter 16: Router Interfaces and Media;
Introduction;
Viewing Interface Status;
Configuring Serial Interfaces;
Using an Internal T1 CSU/DSU;
Using an Internal ISDN PRI Module;
Using an Internal 56 Kbps CSU/DSU;
Configuring an Async Serial Interface;
Configuring ATM Subinterfaces;
Setting Payload Scrambling on an ATM Circuit;
Classical IP Over ATM;
Configuring Ethernet Interface Features;
Configuring Token Ring Interface Features;
Connecting VLAN Trunks with ISL;
Connecting VLAN Trunks with 802.1Q;
LPD Printer Support;
Chapter 17: Simple Network Management Protocol;
Introduction;
Configuring SNMP;
Extracting Router Information via SNMP Tools;
Recording Important Router...
Details
| Erscheinungsjahr: | 2007 |
|---|---|
| Fachbereich: | Datenkommunikation, Netze & Mailboxen |
| Genre: | Informatik |
| Rubrik: | Naturwissenschaften & Technik |
| Medium: | Taschenbuch |
| Inhalt: | 1207 S. |
| ISBN-13: | 9780596527228 |
| ISBN-10: | 0596527225 |
| Sprache: | Englisch |
| Einband: | Kartoniert / Broschiert |
| Autor: | Dooley, Kevin |
| Hersteller: |
O'Reilly Media
O'Reilly Media, Inc. |
| Maße: | 237 x 182 x 68 mm |
| Von/Mit: | Kevin Dooley |
| Erscheinungsdatum: | 30.01.2007 |
| Gewicht: | 1,822 kg |
Über den Autor
Kevin Dooley has been designing and implementing networks as an independent consultant for more than ten years. He's built large scale Local and Wide Area Networks for several of Canada's largest companies. Kevin holds a PhD in physics from the University of Toronto and is the author of "Designing Large-Scale LANs" (O'Reilly).
Ian J. Brown is a Cisco Certified Internetworking Expert with more than 12 years of experience in the networking industry. His areas of expertise include TCP/IP and IP routing, as well as management, security, design, and troubleshooting for large-scale networks.
Inhaltsverzeichnis
Preface;
What's New in This Edition;
Organization;
What's in This Book;
Conventions Used in This Book;
Using Code Examples;
We'd Like Your Feedback!;
Safari® Enabled;
Acknowledgments;
Chapter 1: Router Configuration and File Management;
Introduction;
Configuring the Router via TFTP;
Saving Router Configuration to Server;
Booting the Router Using a Remote Configuration File;
Storing Configuration Files Larger Than NVRAM;
Clearing the Startup Configuration;
Loading a New IOS Image;
Booting a Different IOS Image;
Booting over the Network;
Copying an IOS Image to a Server;
Copying an IOS Image Through the Console;
Deleting Files from Flash;
Partitioning Flash;
Using the Router as a TFTP Server;
Using FTP from the Router;
Generating Large Numbers of Router Configurations;
Changing the Configurations of Many Routers at Once;
Extracting Hardware Inventory Information;
Backing Up Router Configurations;
Warm Reload;
Warm Upgrade;
Configuration Archiving;
Locking Configuration Access;
Chapter 2: Router Management;
Introduction;
Creating Command Aliases;
Managing the Router's ARP Cache;
Tuning Router Buffers;
Auto Tuning Buffers;
Using the Cisco Discovery Protocol;
Disabling the Cisco Discovery Protocol;
Using the Small Servers;
Enabling HTTP Access to a Router;
Enabling Secure HTTP (HTTPS) Access to a Router;
Using Static Hostname Tables;
Enabling Domain Name Services;
Disabling Domain Name Lookups;
Specifying a Router Reload Time;
Scheduling of Router Commands;
Displaying Historical CPU Values;
Creating Exception Dump Files;
Generating a Report of Interface Information;
Generating a Report of Routing Table Information;
Generating a Report of ARP Table Information;
Generating a Server Host Table File;
Chapter 3: User Access and Privilege Levels;
Introduction;
Setting Up User IDs;
Encrypting Passwords;
Using Better Password-Encryption Techniques;
Removing Passwords from a Router Configuration File;
Deciphering Cisco's Weak Password Encryption;
Displaying Active Users;
Sending Messages to Other Users;
Changing the Number of VTYs;
Changing VTY Timeouts;
Restricting VTY Access by Protocol;
Enabling Absolute Timeouts on VTY Lines;
Implementing Banners;
Disabling Banners on a Port;
Disabling Router Lines;
Reserving a VTY Port for Administrative Access;
Restricting Inbound Telnet Access;
Logging Telnet Access;
Setting the Source Address for Telnet;
Automating the Login Sequence;
Using SSH for Secure Access;
Changing Privilege Level of IOS Commands;
Defining Per User Privileges;
Defining Per Port Privileges;
Chapter 4: TACACS+;
Introduction;
Authenticating Login IDs from a Central System;
Restricting Command Access;
Losing Access to the TACACS+ Server;
Disabling TACACS+ Authentication on a Particular Line;
Capturing User Keystrokes;
Logging System Events;
Setting the IP Source Address for TACACS+ Messages;
Sample Server Configuration Files;
Chapter 5: IP Routing;
Introduction;
Finding an IP Route;
Finding Types of IP Routes;
Converting Different Mask Formats;
Using Static Routing;
Floating Static Routes;
Using Policy-Based Routing to Route Based on Source Address;
Using Policy-Based Routing to Route Based on Application Type;
Examining Policy-Based Routing;
Changing Administrative Distances;
Routing Over Multiple Paths with Equal Costs;
Static Routes That Track Interfaces or Other Routes;
Keeping Statistics on Routing Table Changes;
Chapter 6: RIP;
Introduction;
Configuring RIP Version 1;
Filtering Routes with RIP;
Redistributing Static Routes into RIP;
Redistributing Routes Using Route Maps;
Creating a Default Route in RIP;
Disabling RIP on an Interface;
Default Passive Interface;
Unicast Updates for RIP;
Applying Offsets to Routes;
Adjusting Timers;
Configuring Interpacket Delay;
Enabling Nonperiodic Updates;
Increasing the RIP Input Queue;
Configuring RIP Version 2;
Enabling RIP Authentication;
RIP Route Summarization;
Route Tagging;
Chapter 7: EIGRP;
Introduction;
Configuring EIGRP;
Filtering Routes with EIGRP;
Redistributing Routes into EIGRP;
Redistributing Routes into EIGRP Using Route Maps;
Disabling EIGRP on an Interface;
Adjusting EIGRP Metrics;
Adjusting Timers;
Enabling EIGRP Authentication;
EIGRP Route Summarization;
Logging EIGRP Neighbor State Changes;
Limiting EIGRP's Bandwidth Utilization;
EIGRP Stub Routing;
Route Tagging;
Viewing EIGRP Status;
Chapter 8: OSPF;
Introduction;
Configuring OSPF;
Filtering Routes in OSPF;
Adjusting OSPF Costs;
Creating a Default Route in OSPF;
Redistributing Static Routes into OSPF;
Redistributing External Routes into OSPF;
Manipulating DR Selection;
Setting the OSPF RID;
Enabling OSPF Authentication;
Selecting the Appropriate Area Types;
Using OSPF on Dial Interfaces;
Summarizing Routes in OSPF;
Disabling OSPF on Certain Interfaces;
Changing the Network Type on an Interface;
OSPF Route Tagging;
Logging OSPF Adjacency Changes;
Adjusting OSPF Timers;
Reducing OSPF Traffic in Stable Networks;
OSPF Virtual Links;
Viewing OSPF Status with Domain Names;
Debugging OSPF;
Chapter 9: BGP;
Introduction;
Configuring BGP;
Using eBGP Multihop;
Adjusting the Next-Hop Attribute;
Connecting to Two ISPs;
Connecting to Two ISPs with Redundant Routers;
Restricting Networks Advertised to a BGP Peer;
Adjusting Local Preference Values;
Load-Balancing;
Removing Private ASNs from the AS Path;
Filtering BGP Routes Based on AS Paths;
Reducing the Size of the Received Routing Table;
Summarizing Outbound Routing Information;
Prepending ASNs to the AS Path;
Redistributing Routes with BGP;
Using Peer Groups;
Authenticating BGP Peers;
Using BGP Communities;
Using BGP Route Reflectors;
Putting It All Together;
Chapter 10: Frame Relay;
Introduction;
Setting Up Frame Relay with Point-to-Point Subinterfaces;
Adjusting LMI Options;
Setting Up Frame Relay with Map Statements;
Using Multipoint Subinterfaces;
Configuring Frame Relay SVCs;
Simulating a Frame Relay Cloud;
Compressing Frame Relay Data on a Subinterface;
Compressing Frame Relay Data with Maps;
PPP over Frame Relay;
Viewing Frame Relay Status Information;
Chapter 11: Handling Queuing and Congestion;
Introduction;
Fast Switching and CEF;
Setting the DSCP or TOS Field;
Using Priority Queuing;
Using Custom Queuing;
Using Custom Queues with Priority Queues;
Using Weighted Fair Queuing;
Using Class-Based Weighted Fair Queuing;
Using NBAR Classification;
Controlling Congestion with WRED;
Using RSVP;
Manual RSVP Reservations;
Aggregating RSVP Reservations;
Using Generic Traffic Shaping;
Using Frame-Relay Traffic Shaping;
Using Committed Access Rate;
Implementing Standards-Based Per-Hop Behavior;
AutoQoS;
Viewing Queue Parameters;
Chapter 12: Tunnels and VPNs;
Introduction;
Creating a Tunnel;
Tunneling Foreign Protocols in IP;
Tunneling with Dynamic Routing Protocols;
Viewing Tunnel Status;
Creating an Encrypted Router-to-Router VPN in a GRE Tunnel;
Creating an Encrypted VPN Between the LAN Interfaces of Two Routers;
Generating RSA Keys;
Creating a Router-to-Router VPN with RSA Keys;
Creating a VPN Between a Workstation and a Router;
Creating an SSL VPN;
Checking IPSec Protocol Status;
Chapter 13: Dial Backup;
Introduction;
Automating Dial Backup;
Using Dialer Interfaces;
Using an Async Modem on the AUX Port;
Using Backup Interfaces;
Using Dialer Watch;
Using Virtual Templates;
Ensuring Proper Disconnection;
View Dial Backup Status;
Debugging Dial Backup;
Chapter 14: NTP and Time;
Introduction;
Time-Stamping Router Logs;
Setting the Time;
Setting the Time Zone;
Adjusting for Daylight Saving Time;
Synchronizing the Time on All Routers (NTP);
Configuring NTP Redundancy;
Setting the Router As the NTP Master for the Network;
Changing NTP Synchronization Periods;
Using NTP to Send Periodic Broadcast Time Updates;
Using NTP to Send Periodic Multicast Time Updates;
Enabling and Disabling NTP Per Interface;
NTP Authentication;
Limiting the Number of Peers;
Restricting Peers;
Setting the Clock Period;
Checking the NTP Status;
Debugging NTP;
NTP Logging;
Extended Daylight Saving Time;
NTP Server Configuration;
Chapter 15: DLSw;
Introduction;
Simple Bridging;
Configuring DLSw;
Using DLSw to Bridge Between Ethernet and Token Ring;
Converting Ethernet and Token Ring MAC Addresses;
Configuring SDLC;
Configuring SDLC for Multidrop Connections;
Using STUN;
Using BSTUN;
Controlling DLSw Packet Fragmentation;
Tagging DLSw Packets for QoS;
Supporting SNA Priorities;
DLSw+ Redundancy and Fault Tolerance;
Viewing DLSw Status Information;
Viewing SDLC Status Information;
Debugging DSLw;
Chapter 16: Router Interfaces and Media;
Introduction;
Viewing Interface Status;
Configuring Serial Interfaces;
Using an Internal T1 CSU/DSU;
Using an Internal ISDN PRI Module;
Using an Internal 56 Kbps CSU/DSU;
Configuring an Async Serial Interface;
Configuring ATM Subinterfaces;
Setting Payload Scrambling on an ATM Circuit;
Classical IP Over ATM;
Configuring Ethernet Interface Features;
Configuring Token Ring Interface Features;
Connecting VLAN Trunks with ISL;
Connecting VLAN Trunks with 802.1Q;
LPD Printer Support;
Chapter 17: Simple Network Management Protocol;
Introduction;
Configuring SNMP;
Extracting Router Information via SNMP Tools;
Recording Important Router...
What's New in This Edition;
Organization;
What's in This Book;
Conventions Used in This Book;
Using Code Examples;
We'd Like Your Feedback!;
Safari® Enabled;
Acknowledgments;
Chapter 1: Router Configuration and File Management;
Introduction;
Configuring the Router via TFTP;
Saving Router Configuration to Server;
Booting the Router Using a Remote Configuration File;
Storing Configuration Files Larger Than NVRAM;
Clearing the Startup Configuration;
Loading a New IOS Image;
Booting a Different IOS Image;
Booting over the Network;
Copying an IOS Image to a Server;
Copying an IOS Image Through the Console;
Deleting Files from Flash;
Partitioning Flash;
Using the Router as a TFTP Server;
Using FTP from the Router;
Generating Large Numbers of Router Configurations;
Changing the Configurations of Many Routers at Once;
Extracting Hardware Inventory Information;
Backing Up Router Configurations;
Warm Reload;
Warm Upgrade;
Configuration Archiving;
Locking Configuration Access;
Chapter 2: Router Management;
Introduction;
Creating Command Aliases;
Managing the Router's ARP Cache;
Tuning Router Buffers;
Auto Tuning Buffers;
Using the Cisco Discovery Protocol;
Disabling the Cisco Discovery Protocol;
Using the Small Servers;
Enabling HTTP Access to a Router;
Enabling Secure HTTP (HTTPS) Access to a Router;
Using Static Hostname Tables;
Enabling Domain Name Services;
Disabling Domain Name Lookups;
Specifying a Router Reload Time;
Scheduling of Router Commands;
Displaying Historical CPU Values;
Creating Exception Dump Files;
Generating a Report of Interface Information;
Generating a Report of Routing Table Information;
Generating a Report of ARP Table Information;
Generating a Server Host Table File;
Chapter 3: User Access and Privilege Levels;
Introduction;
Setting Up User IDs;
Encrypting Passwords;
Using Better Password-Encryption Techniques;
Removing Passwords from a Router Configuration File;
Deciphering Cisco's Weak Password Encryption;
Displaying Active Users;
Sending Messages to Other Users;
Changing the Number of VTYs;
Changing VTY Timeouts;
Restricting VTY Access by Protocol;
Enabling Absolute Timeouts on VTY Lines;
Implementing Banners;
Disabling Banners on a Port;
Disabling Router Lines;
Reserving a VTY Port for Administrative Access;
Restricting Inbound Telnet Access;
Logging Telnet Access;
Setting the Source Address for Telnet;
Automating the Login Sequence;
Using SSH for Secure Access;
Changing Privilege Level of IOS Commands;
Defining Per User Privileges;
Defining Per Port Privileges;
Chapter 4: TACACS+;
Introduction;
Authenticating Login IDs from a Central System;
Restricting Command Access;
Losing Access to the TACACS+ Server;
Disabling TACACS+ Authentication on a Particular Line;
Capturing User Keystrokes;
Logging System Events;
Setting the IP Source Address for TACACS+ Messages;
Sample Server Configuration Files;
Chapter 5: IP Routing;
Introduction;
Finding an IP Route;
Finding Types of IP Routes;
Converting Different Mask Formats;
Using Static Routing;
Floating Static Routes;
Using Policy-Based Routing to Route Based on Source Address;
Using Policy-Based Routing to Route Based on Application Type;
Examining Policy-Based Routing;
Changing Administrative Distances;
Routing Over Multiple Paths with Equal Costs;
Static Routes That Track Interfaces or Other Routes;
Keeping Statistics on Routing Table Changes;
Chapter 6: RIP;
Introduction;
Configuring RIP Version 1;
Filtering Routes with RIP;
Redistributing Static Routes into RIP;
Redistributing Routes Using Route Maps;
Creating a Default Route in RIP;
Disabling RIP on an Interface;
Default Passive Interface;
Unicast Updates for RIP;
Applying Offsets to Routes;
Adjusting Timers;
Configuring Interpacket Delay;
Enabling Nonperiodic Updates;
Increasing the RIP Input Queue;
Configuring RIP Version 2;
Enabling RIP Authentication;
RIP Route Summarization;
Route Tagging;
Chapter 7: EIGRP;
Introduction;
Configuring EIGRP;
Filtering Routes with EIGRP;
Redistributing Routes into EIGRP;
Redistributing Routes into EIGRP Using Route Maps;
Disabling EIGRP on an Interface;
Adjusting EIGRP Metrics;
Adjusting Timers;
Enabling EIGRP Authentication;
EIGRP Route Summarization;
Logging EIGRP Neighbor State Changes;
Limiting EIGRP's Bandwidth Utilization;
EIGRP Stub Routing;
Route Tagging;
Viewing EIGRP Status;
Chapter 8: OSPF;
Introduction;
Configuring OSPF;
Filtering Routes in OSPF;
Adjusting OSPF Costs;
Creating a Default Route in OSPF;
Redistributing Static Routes into OSPF;
Redistributing External Routes into OSPF;
Manipulating DR Selection;
Setting the OSPF RID;
Enabling OSPF Authentication;
Selecting the Appropriate Area Types;
Using OSPF on Dial Interfaces;
Summarizing Routes in OSPF;
Disabling OSPF on Certain Interfaces;
Changing the Network Type on an Interface;
OSPF Route Tagging;
Logging OSPF Adjacency Changes;
Adjusting OSPF Timers;
Reducing OSPF Traffic in Stable Networks;
OSPF Virtual Links;
Viewing OSPF Status with Domain Names;
Debugging OSPF;
Chapter 9: BGP;
Introduction;
Configuring BGP;
Using eBGP Multihop;
Adjusting the Next-Hop Attribute;
Connecting to Two ISPs;
Connecting to Two ISPs with Redundant Routers;
Restricting Networks Advertised to a BGP Peer;
Adjusting Local Preference Values;
Load-Balancing;
Removing Private ASNs from the AS Path;
Filtering BGP Routes Based on AS Paths;
Reducing the Size of the Received Routing Table;
Summarizing Outbound Routing Information;
Prepending ASNs to the AS Path;
Redistributing Routes with BGP;
Using Peer Groups;
Authenticating BGP Peers;
Using BGP Communities;
Using BGP Route Reflectors;
Putting It All Together;
Chapter 10: Frame Relay;
Introduction;
Setting Up Frame Relay with Point-to-Point Subinterfaces;
Adjusting LMI Options;
Setting Up Frame Relay with Map Statements;
Using Multipoint Subinterfaces;
Configuring Frame Relay SVCs;
Simulating a Frame Relay Cloud;
Compressing Frame Relay Data on a Subinterface;
Compressing Frame Relay Data with Maps;
PPP over Frame Relay;
Viewing Frame Relay Status Information;
Chapter 11: Handling Queuing and Congestion;
Introduction;
Fast Switching and CEF;
Setting the DSCP or TOS Field;
Using Priority Queuing;
Using Custom Queuing;
Using Custom Queues with Priority Queues;
Using Weighted Fair Queuing;
Using Class-Based Weighted Fair Queuing;
Using NBAR Classification;
Controlling Congestion with WRED;
Using RSVP;
Manual RSVP Reservations;
Aggregating RSVP Reservations;
Using Generic Traffic Shaping;
Using Frame-Relay Traffic Shaping;
Using Committed Access Rate;
Implementing Standards-Based Per-Hop Behavior;
AutoQoS;
Viewing Queue Parameters;
Chapter 12: Tunnels and VPNs;
Introduction;
Creating a Tunnel;
Tunneling Foreign Protocols in IP;
Tunneling with Dynamic Routing Protocols;
Viewing Tunnel Status;
Creating an Encrypted Router-to-Router VPN in a GRE Tunnel;
Creating an Encrypted VPN Between the LAN Interfaces of Two Routers;
Generating RSA Keys;
Creating a Router-to-Router VPN with RSA Keys;
Creating a VPN Between a Workstation and a Router;
Creating an SSL VPN;
Checking IPSec Protocol Status;
Chapter 13: Dial Backup;
Introduction;
Automating Dial Backup;
Using Dialer Interfaces;
Using an Async Modem on the AUX Port;
Using Backup Interfaces;
Using Dialer Watch;
Using Virtual Templates;
Ensuring Proper Disconnection;
View Dial Backup Status;
Debugging Dial Backup;
Chapter 14: NTP and Time;
Introduction;
Time-Stamping Router Logs;
Setting the Time;
Setting the Time Zone;
Adjusting for Daylight Saving Time;
Synchronizing the Time on All Routers (NTP);
Configuring NTP Redundancy;
Setting the Router As the NTP Master for the Network;
Changing NTP Synchronization Periods;
Using NTP to Send Periodic Broadcast Time Updates;
Using NTP to Send Periodic Multicast Time Updates;
Enabling and Disabling NTP Per Interface;
NTP Authentication;
Limiting the Number of Peers;
Restricting Peers;
Setting the Clock Period;
Checking the NTP Status;
Debugging NTP;
NTP Logging;
Extended Daylight Saving Time;
NTP Server Configuration;
Chapter 15: DLSw;
Introduction;
Simple Bridging;
Configuring DLSw;
Using DLSw to Bridge Between Ethernet and Token Ring;
Converting Ethernet and Token Ring MAC Addresses;
Configuring SDLC;
Configuring SDLC for Multidrop Connections;
Using STUN;
Using BSTUN;
Controlling DLSw Packet Fragmentation;
Tagging DLSw Packets for QoS;
Supporting SNA Priorities;
DLSw+ Redundancy and Fault Tolerance;
Viewing DLSw Status Information;
Viewing SDLC Status Information;
Debugging DSLw;
Chapter 16: Router Interfaces and Media;
Introduction;
Viewing Interface Status;
Configuring Serial Interfaces;
Using an Internal T1 CSU/DSU;
Using an Internal ISDN PRI Module;
Using an Internal 56 Kbps CSU/DSU;
Configuring an Async Serial Interface;
Configuring ATM Subinterfaces;
Setting Payload Scrambling on an ATM Circuit;
Classical IP Over ATM;
Configuring Ethernet Interface Features;
Configuring Token Ring Interface Features;
Connecting VLAN Trunks with ISL;
Connecting VLAN Trunks with 802.1Q;
LPD Printer Support;
Chapter 17: Simple Network Management Protocol;
Introduction;
Configuring SNMP;
Extracting Router Information via SNMP Tools;
Recording Important Router...
Details
| Erscheinungsjahr: | 2007 |
|---|---|
| Fachbereich: | Datenkommunikation, Netze & Mailboxen |
| Genre: | Informatik |
| Rubrik: | Naturwissenschaften & Technik |
| Medium: | Taschenbuch |
| Inhalt: | 1207 S. |
| ISBN-13: | 9780596527228 |
| ISBN-10: | 0596527225 |
| Sprache: | Englisch |
| Einband: | Kartoniert / Broschiert |
| Autor: | Dooley, Kevin |
| Hersteller: |
O'Reilly Media
O'Reilly Media, Inc. |
| Maße: | 237 x 182 x 68 mm |
| Von/Mit: | Kevin Dooley |
| Erscheinungsdatum: | 30.01.2007 |
| Gewicht: | 1,822 kg |
Warnhinweis
Ähnliche Produkte
Taschenbuch
Lieferzeit 1-2 Wochen
Taschenbuch
Taschenbuch
Aktuell nicht verfügbar
Taschenbuch
Lieferzeit 1-2 Wochen
Taschenbuch
Lieferzeit 2-3 Wochen
Taschenbuch
Aktuell nicht verfügbar
Bundle
Aktuell nicht verfügbar
Taschenbuch
